ActionTec T3280V User Manual page 8

USB
This LED brights green when there is an active device connected to the USB
port.
Wi-Fi 2.4G
This LED brights green when the Gateway's radio is operating in the 2.4GHz
band.
Wi-Fi 5G
This LED brights green when the Gateway's radio is operating in the 5GHz
band.
WPS Button
The WPS button is used when connecting a wireless device to the Gateway's
wireless network using WPS.
Rear Panel
The rear panel of the Gateway features 8 ports, and a Reset button.
Power Port
The Power port is used to connect the Power cord (Model No.
CDS036-W120U
Reset Button
Depressing the Reset button for 10 seconds will restore the Gateway's
factory default settings. The reset process will start after releasing the
Windstream T3280V Gateway
, made by Actiontec) to the Gateway.
button.
7