Table of Contents
Advertisement
VENTILATION FAN / LED LIGHT
READ AND SAVE THESE INSTRUCTIONS
Address: 46101 Fremont Boulevard, Fremont, CA 94538
US Toll Free Number:
1-888-979-9889 - Technical Support
1-877-685-4384 - Customer Sales Support
www.deltabreez.com
TABLE OF CONTENTS
MODEL 110LED-ADJ
MFG Model
VFB110D4LED3-A
2
3
4
5
6
10
11
12
13
13
14
Advertisement
Table of Contents
Related Manuals for Delta breez 110LED-ADJ
Summary of Contents for Delta breez 110LED-ADJ
-
Page 1: Table Of Contents
VENTILATION FAN / LED LIGHT MODEL 110LED-ADJ TABLE OF CONTENTS Package Contents General Safety Information Preparation and Wiring Diagrams Assembly Instructions - New Construction Assembly Instructions - Existing Construction Grille Installation Care and Maintenance Troubleshooting Dimensions Product Specifications Warranty READ AND SAVE THESE INSTRUCTIONS Address: 46101 Fremont Boulevard, Fremont, CA 94538 US Toll Free Number: 1-888-979-9889 –... -
Page 2: Package Contents
PACKAGE CONTENTS PART DESCRIPTION Fan Body Grille Suspension bracket Ⅰ 13”(318.5mm) Suspension bracket Ⅱ 13”(318.5mm) Duct Connector HARDWARE CONTENTS (Images are to scale) × 4 Long Wood Screw ( ø 4 x 25mm) × 4 Short screw (#8-32x1/4”) × 1 Duct Screw (M4x12mm) -
Page 3: General Safety Information
GENERAL SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS 7. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application GENERAL SAFETY INFORMATION and be connected to a GFCI (Ground Fault Circuit 1. -
Page 4: Preparation And Wiring Diagrams
Use a roof cap or wall cap that has a built-in damper to reduce backdrafts. External timer/dimmer switch can be used. Please contact Delta Breez customer service and consult with a licensed electrician for compatibility. WIRING DIAGRAM BLACK... -
Page 5: Assembly Instructions - New Construction
ASSEMBLY INSTRUCTIONS NEW CONSTRUCTION – ATTACHING TO THE JOIST BEFORE INSTALLATION Turn off power source. Review all safety precautions. 1. Attach the duct connector from the housing can Duct screw (M4X12) Insert tab into inside , and secure using the duct screw from Parts Bag slot in housing (M4x12) -
Page 6: Assembly Instructions - Existing Construction
ASSEMBLY INSTRUCTIONS 4. Remove the fan junction box cover . Using wire nuts (not supplied), connect house wires to fan wires as shown in the wiring diagram on page 4. Reattach fan junction box cover 5. Connect a 4 in. circular duct (not supplied) and vent to the outside. - Page 7 ASSEMBLY INSTRUCTIONS 2. Measure the opening to ensure it is large enough to 2 accommodate the new fan body (10 1/4 in. x 10 1/4 in.). 3. If this fan is not replacing an old fan, be sure to cut a 10 1/4 in.
- Page 8 ASSEMBLY INSTRUCTIONS 6. Remove the fan junction box cover . Using wire nuts (not supplied), connect house wires to fan wires as shown in the wiring diagram on page 4. Reattach fan junction box cover 7. Insert housing can into the ceiling cut out. Secure the housing can from below by using 2 long wood screws through the flange into the wood support and 2 long wood screws through the flange into the...
- Page 9 ASSEMBLY INSTRUCTIONS Install from above with suspension brackets (attic accessible) *ONLY IF UNABLE TO ATTACH DIRECTLY TO JOIST(S) Turn off power source. Review all safety precautions. 1. For joist spacing 16 in. - 24in., insert suspension Body bracket I and suspension bracket II into the Suspension bracket cover on the duct connector side and the...
-
Page 10: Grille Installation
GRILLE INSTALLATION Insert the LED light connector into the fan body. Grille Slots Spring Lighting Connector Using the switch on the back of grille, choose the color temperature you want for your LED. You can choose from 2700K warm white, 4000K cool white, and 5000K daylight white. -
Page 11: Care And Maintenance
CARE AND MAINTENANCE See safety information before proceeding. Routine maintenance should be done at least once a year. • Never use solvents, thinner or harsh chemicals when cleaning the fan. • Do not allow water to enter the motor. • Do not immerse metal parts in water. •... -
Page 12: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION The fan is not turning on 1. Power off 1. Make sure power supply is on. 2. Faulty switch 2. Test or replace switch. 3. Faulty wire connection 3. Check wire in switch box. The fan seems louder 1. -
Page 13: Dimensions
DIMENSIONS Unit: Inches (mm) PRODUCT SPECIFICATIONS Voltage Frequency Air Flow @ 0.1"SP Power @ 0.1"SP Max Current Weight Model No. Note Light Spec (Hz) (CFM) (Amps) (lb.) 13W LED, 850 Lumens, 110LED-ADJ / Single 14.8 0.48 2700K VFB110D4LED3-A Speed 4000K 5000K Note: Design and specifications subject to change without notice. -
Page 14: Warranty
4. This warranty does not extend to fluorescent lamp starters and tubes. 5. The warranty does not cover if user does not comply with manufacturer’s installation manual. 6. To qualify for warranty service, you must notify Delta Electronics at the address or telephone number below.