Removing The Control Board - Acer TravelMate 4060 Service Manual

Hide thumbs Also See for TravelMate 4060:
Table of Contents

Advertisement

13. Remove the dummy card.
14. Remove the two screws securing the main board to the lower case.
15. Then detach the main board from the lower case carefully.

Removing the Control Board

1.
See "Removing the Battery" on page 46.
2.
See "Removing the Middle Cover" on page 50.
3.
See "Removing the Keyboard" on page 50.
4.
See "Removing the Power Board" on page 55.
5.
See "Removing the Upper Case Assembly" on page 55.
6.
See "Removing the Speaker Set" on page 57.
7.
See "Removing the SW DJ Board Assembly" on page 57.
8.
See "Removing the Audio Board" on page 58.
9.
See "Removing the VGA Thermal Module" on page 58.
10. See "Removing the Modem Board" on page 59.
11. See "Removing the Main Board" on page 59.
12. Turn over the main board as shown.
13. Disconnect the control board antenna.
14. Pop out the control board then remove it.
Chapter 3
60

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Travelmate 4060 series

Table of Contents