Hints And Tips - Matsui MCD7W19E Installation Instructions Manual

Hints and Tips

Problems
The drying process
takes a long time.
Laundry comes out
damp at the end of the
drying process.
The dryer cannot
be opened or the
programme cannot be
started. The dryer does
not get activated when
adjusted.
46
Matsui Condenser Tumble Dryer MCD7W19E Manual.indb 46
Description / Possible
Cause
• The surface of the lint filter
might be clogged.
• The condenser might be
clogged.
• The ventilation grills in front
of the machine might be
closed.
• There might be a layer of
lime scale on the humidity
sensor.
• The dryer might be
overloaded with laundry.
• The laundry might be
insufficiently spun.
The laundry that comes out hot at the end of the drying process generally
feels more humid.
• The programme used might
not be suitable for the type
of laundry.
• The surface of the lint filter
might be clogged.
• The condenser might be
clogged.
• The dryer might be
overloaded with laundry.
• The laundry might be
insufficiently spun.
• The dryer might not be
plugged in.
• The loading door might be
open.
• You might not have set a
programme or pressed the
Start/Pause key.
• Child lock might be active.
Solution
• Wash the filter with lukewarm water.
• Clean or Wash the condenser.
• Open the doors/windows to prevent
the room temperature from rising too
much.
• Clean the humidity sensor.
• Do not overload the dryer.
• Select a higher spin speed on your
washing machine.
• Check the care labels on the laundry
items, select a suitable programme for
the type of laundry and additionally,
use the time programmes.
• Wash the filter with lukewarm water.
• Wash the condenser.
• Do not overload the dryer.
• Select a higher spin speed on your
washing machine.
• Make sure that the plug is fitted in the
socket.
• Make sure that the loading door is
properly closed.
• Make sure that the programme has
been set and the dryer is not in the
Standby (Pause) mode.
• Deactivate the child lock.
14/02/2019 16:57