Page 8
Adjust the cutting depth to the thickness of the workpiece.
Page 9
Accessory Adjust the cutting depth to the thickness of the workpiece.
Page 11
Wear personal protective equipment. Depending on d) Use special care when working corners, sharp edges refuse or by burning them. Milwaukee Distributors off er to application, use face shield, safety goggles or safety etc. Avoid bouncing and snagging the accessory. Cor- d) Wheels must be used only for recommended applica- retrieve old batteries to protect our environment.
Should components need to be replaced which have EC-DECLARATION OF CONFORMITY advice and collection point. charged, after used. not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). European Conformity Mark We declare under our sole responsibility that the product To obtain the longest possible battery life remove the battery If needed, an exploded view of the tool can be ordered.