Sony SRS-NB10 Help Manual page 75

Wireless neckband speaker

Hide thumbs Also See for SRS-NB10:

Table of Contents

Help Guide

Wireless Neckband Speaker

SRS-NB10

Initializing the neckband speaker

If the neckband speaker fails to operate successfully after you reset it, initialize the neckband speaker to resume its

factory default settings.

Make sure the neckband speaker is turned off, and then press the

(play/call) button on the neckband speaker simultaneously for about 7 seconds.

Note

While charging is in progress, you cannot initialize the neckband speaker.

Upon completion of initialization, the indicator on the neckband speaker flashes 4 times in blue.

The settings, such as the volume settings, are restored to the factory default settings and all the pairing information is

deleted.