Making A Call - Sony SRS-NB10 Help Manual

Help Guide
Wireless Neckband Speaker
SRS-NB10

Making a call

You can enjoy hands-free calls with a BLUETOOTH mobile phone that supports the BLUETOOTH profile HFP (Hands-
free Profile) or HSP (Headset Profile) via BLUETOOTH connection.
If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP.
Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions supplied with
the mobile phone.
Connect the neckband speaker with a BLUETOOTH mobile phone.
1
When a BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
neckband speaker and the indicator on the neckband speaker starts flashing in blue.
Operate the BLUETOOTH mobile phone to make a call.
2
When you make a call, playback pauses and the dial tone is heard from the neckband speaker.
The neckband speaker is equipped with built-in omnidirectional microphones. You can talk without considering the
locations of the microphones.
If no dial tone is heard via the neckband speaker
The neckband speaker may not be connected with a BLUETOOTH mobile phone with HFP or HSP. Check the
connection status on the BLUETOOTH mobile phone.
Switch the call device to the neckband speaker by pressing and holding the
seconds.
While the phone is ringing or a phone conversation is in progress, adjust the volume by pressing the -/+
3
(volume) buttons on the neckband speaker or operating the BLUETOOTH mobile phone.
52
(play/call) button for about 2