WARNING:Care must be taken when removing the Upper Base from the Lower Base to prevent damage or
stress to the surface.
5. Ease the lower casing outward to clear the securing clips and pry apart the upper left side as shown, and lift the
rear edge of the Upper Base upward.
6. Ease the lower casing outward to clear the securing clips and pry apart the right side as shown. Lift the rear
edge of the Upper Base upward.
7. Completely remove the Upper Base from the Lower Base.
Removing the Finger Print Reader
NOTE: Only the Discrete SKU supports Finger Print Reader technology.
1. See "Removing the Upper Base" on page 72.
Chapter 3
75