Clock Functions - AEG COMPETENCE B6142-1 Operating Instructions Manual

Clock Functions

COUNTDOWN
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the functioning of the oven.
COOK TIME
To set how long the oven is to be in use.
END TIME
To set when the oven is to switch off again.
TIME
To set, change or check the time.
(See also section "Before Using for the First Time".)
General information
3
• Before setting the time always switch the appliance on using the
mains button N.
• After a clock function has been selected the relevant function indica-
tor will flash for approx. 5 seconds. During this time the required
times can be set or changed using the + or - button.
• After the required time has been set the function indicator will flash
again for approx. 5 seconds. After this the function indicator stays
on. The set time will begin to count down.
23