Table of Contents
Advertisement
4.
Disconnect the antenna cables from the WLAN board.
NOTE: There are 2 antenna cables connected to the WLAN board module. The Black antenna cable is
connected to the MAIN connector and the Gray antenna cable is connected to the AUX connector.
5.
Move the antenna away from the WLAN board and remove the one screw (H) on the WLAN board to
release the WLAN board.
Step
1
Chapter 3
Size (Quantity)
M2 x L3 (1)
Black
Color
Torque
1.6 kgf-cm
55
Advertisement
Table of Contents
