Removing The Touchpad Board - Acer Aspire 4352 Service Manual

Removing the Touchpad Board

1. Perform the "Removing the Palmrest Module/Upper
page 3-21.
2. Open the connector latch for the touchpad board (1) and then disconnect the cable (2).
Figure 3-29. Touchpad Cable
3. Insert a small flat-blade screwdriver between the touchpad board and the upper case, and
carefully pry the board loose. Remove the touchpad board from the palm rest.
Figure 3-30. Touchpad Board
NOTE: NOTE:
A circuit board that is > 10cm
Figure 3-30. Follow the local regulations for disposing this type of circuit board.
3-24
Case" procedure described on
2
has been highlighted with a yellow rectangle in
Machine Maintenance
0