Table of Contents
Advertisement
6.
See "Removing the CPU Heatsink Plate" on page 62.
7.
See "Removing the ODD Module(1)" on page 63.
8.
See "Removing the HDD Bracket" on page 63.
9.
See "Removing the Main Board" on page 64.
10. Remove the two screws that fasten the DC board. Then detach the DC board from the lower case.
Removing the I/O Port Bracket
1.
See "Removing the Battery" on page 46.
2.
See "Removing the Middle Cover" on page 50.
3.
See "Removing the Keyboard" on page 57.
4.
See "Removing the Floppy Disk Drive Module" on page 61.
5.
See "Removing the VGA Heatsink Plate" on page 62.
6.
See "Removing the CPU Heatsink Plate" on page 62.
7.
See "Removing the ODD Module(1)" on page 63.
8.
See "Removing the HDD Bracket" on page 63.
9.
See "Removing the Main Board" on page 64.
10. Remove the four hex screws to detach the I/O port bracket from the main board.
Removing the PCMCIA Slot
1.
See "Removing the Battery" on page 46.
2.
See "Removing the Middle Cover" on page 50.
3.
See "Removing the Keyboard" on page 57.
4.
See "Removing the Floppy Disk Drive Module" on page 61.
5.
See "Removing the VGA Heatsink Plate" on page 62.
6.
See "Removing the CPU Heatsink Plate" on page 62.
7.
See "Removing the ODD Module(1)" on page 63.
8.
See "Removing the HDD Bracket" on page 63.
65
Chapter 3
Hide quick links:
Advertisement
Table of Contents
