Removing the Main Board
1.
See "Removing the Battery" on page 46.
2.
See "Removing the Middle Cover" on page 50.
3.
See "Removing the Keyboard" on page 57.
4.
See "Removing the Floppy Disk Drive Module" on page 61.
5.
See "Removing the VGA Heatsink Plate" on page 62.
6.
See "Removing the CPU Heatsink Plate" on page 62.
7.
See "Removing the ODD Module(1)" on page 63.
8.
See "Removing the HDD Bracket" on page 63.
9.
Disconnect the launch board cable. Tear off the tape that fastens the speaker set cable. Then disconnect
the speaker set cable.
.
10. Remove the two screws holding the main board as the picture shows. Remove another two screws that
fasten the main board. Then detach the main board from the lower case carefully.
Removing the DC Board
1.
See "Removing the Battery" on page 46.
2.
See "Removing the Middle Cover" on page 50.
3.
See "Removing the Keyboard" on page 57.
4.
See "Removing the Floppy Disk Drive Module" on page 61.
5.
See "Removing the VGA Heatsink Plate" on page 62.
Chapter 3
64