Table of Contents
Advertisement
Power Saving Mode
Select the behavior of the unit when no signal is detected.
Options: Standby Mode, Networked Standby Mode, Wake on Signal, Fast Wake on
Signal, Always On
Default: Standby Mode
Note: Full networking support in standby is available in the Networked Standby Mode,
Wake on Signal, Fast Wake on Signal and Always On selections. Standby Mode does
not support networking in standby.
Firmware Update
Update the display's firmware from a USB flash drive. See the firmware upgrade
instructions within the firmware package for more information.
Advanced Settings Reset
Resets all settings in the Advanced Settings menu to their default values.
Planar VM Series User Manual
020-1357-02A
Operating the Display
Page | 53
Advertisement
Table of Contents
