Attaching/Detaching The Stand - Sharp LC-32CHG6451K User Manual

ATTACHING THE STAND
Attaching the stand feet
To complete the stand feet installation you will require a cross head screw driver.
Screws that are included.
4 x
TV panel must be facing downwards.
1
TV panel must be facing downwards.
2
Detaching the stand
Remove the screws highlighted then remove the stand feet from the underside of the TV set.
TV panel must be facing downwards.
R
L
R
1
2
4 x
L
R
1
2
4 x
L

Attaching/detaching the stand

(fi g.1) Place the TV set on a fl at and
clean surface with the panel facing
downwards to avoid damage, then
fi x the stand feet shown.
marked L (left) and R (right).
(fi g.2) Secure the stand feet to
the underside of the TV set using
the screws provided.
3
4
3
4
The feet are
9 9