Table of Contents
Advertisement
ECO Mode menu
ECO Mode
ECO
User
Sel
2 Press the V/v key or ECO MODE key
to select "ECO" or "User" mode.
ECO: Sets each mode to the optimum
energy-saving value.
• With No Input: Standby
• Standby Mode: Low
User: Sets each item of the energy-
saving mode menu as you desire.
3 Press the RETURN key to restore the
previous image.
For details on ECO Mode settings, see
"With No Input," and "Standby Mode"
on the Connection/Power menu
(page 34).
Note
If you set "ECO Mode" to "ECO," or
"Standby Mode" (in "User") to "Low,"
the network control function will be
disabled in standby mode. If the external
control is being performed by using the
network or network control function, do
not select "ECO," or do not set "Standby
Mode" (in "User") to "Low."
Others
g Infrared transmitter
h ID MODE switch (page 32)
Sets an ID mode of the Remote
Commander. If you assign a different ID
number to each projector when multiple
projectors are used, you can control only
the projector with the same ID mode as
that of the Remote Commander.
i CONTROL S output terminal
Connects to the CONTROL S input
terminal on the projector with a
connecting cable (stereo mini plug (not
supplied)) when using the Remote
Commander as a wired one.
You do not need to install batteries in the
Back
Remote Commander, as the power is
supplied from the projector.
About Remote Commander operation
• Direct the Remote Commander toward the
remote control receiver.
• The shorter the distance between the
Remote Commander and the projector is,
the wider the angle within which the
Remote Commander can control the
projector becomes.
• If there is any obstruction between the
Remote Commander and the remote
control receiver on the projector, the
projector may not be able to receive
signals from the Remote Commander.
8
Advertisement
Table of Contents
