Basic Recording Procedure - Olympus VN-540PC User Manual

Recording

Basic recording procedure

Changing the recording scene
1
(☞ P.11).
2
• Each new voice recording file is saved
in the selected folder.
Point the built-in microphone
2
in the direction of the sound to
record.
Slide the REC switch to start
3
recording in the direction of the
arrow.
a File number/Total number of
recorded files in folder
b Voice recorder status indicator
(during recording)
c Elapsed recording time
• The LED indicator light lights.
Slide the REC switch to stop
4
recording in the direction of the
arrow.
EN d File length
12
TIP
• Even when the power is turned off, you
can immediately start recording by
sliding the REC switch up.
NOTE
• To prevent the beginning of the
recording being cut off, start recording
after the LED indicator light has lit or
recording indicator has appeared in
the display.
• When the remaining possible recording
a
time is 60 seconds, the LED indicator
light starts flashing. It flashes more
b
rapidly as the remaining time decreases
(at the 30- and 10-second points).
c
• If the number of files inside the
recorder reached 199 or the memory
becomes full, you will not be able to
record any further, and [FULL] will
be displayed. You will need to delete
unnecessary files to record more
(☞ P.24).
d