Suzuki 2008 XL7 Owner's Manual page 139

To use the auxiliary inputs of the RSE sys-
tem, connect an external auxiliary device
to the color-coded A/V jacks and turn both
the auxiliary device and the video screen
power on. If the video screen is in the DVD
player mode, pressing the AUX button on
the remote control will switch the video
screen from the DVD player mode to the
auxiliary device. The radio can listen to the
audio of the connected auxiliary device by
sourcing to auxiliary. Refer to "Radio(s)" in
this section for more information.
How to Change the RSE Video Screen
Settings
The screen display mode (normal, full, and
zoom), screen brightness, and setup menu
language can be changed from the on
screen setup menu. To change any fea-
ture, perform the following:
1) Press the (display) menu button on
the remote control.
2) Use the remote control
(navigation) arrows and the
button to use the setup menu.
3) Press the (display) menu button
again to remove the setup menu from
the screen.
Audio Output
Audio from the DVD player or auxiliary
inputs can be heard through the following
possible sources:
• Wireless Headphones
• Vehicle Speakers
The RSE system always transmits the
audio signal to the wireless headphones, if
there is audio available. See "Head-
phones" earlier in this section for more
information.
When a device is connected to the radio's
auxiliary input jack, if your vehicle has this
feature, or A/V jacks, the rear seat passen-
gers are able to hear audio from the auxil-
iary device through the wireless or wired
headphones. The front seat passengers
are able to listen to playback from this
device through the vehicle speakers by
selecting AUX as the source on the radio.
, , ,
Video Screen
The video screen is located in the over-
head console.
To use the video screen, do the following:
1) Push the release button located on the
overhead console.
2) Move the screen to the desired posi-
tion.
When the video screen is not in use, push
it up into its locked position.
INSTRUMENT PANEL
If a DVD is playing and the screen is raised
to its locked position, the screen remains
on, this is normal, and the DVD continues
to play through the previous audio source.
Use the remote control power button or
eject the disc to turn off the screen.
The overhead console contains the infra-
red receivers for the wireless headphones
and the infrared receivers for the remote
control. They are located at the rear of the
console.
CAUTION
Avoid directly touching the video
screen, as damage may occur. See
"Cleaning the Video Screen" later in
this section for more information.
Remote Control
To use the remote control, aim it at the
transmitter window at the rear of the over-
head console and press the desired but-
ton. Direct sunlight or very bright light can
affect the ability of the RSE transmitter to
receive signals from the remote control. If
the remote control does not seem to be
working, the batteries may need to be
replaced. See "Battery Replacement" later
in this section. Objects blocking the line of
sight can also affect the function of the
remote control.
If a CD or DVD is in the Radio DVD slot,
the remote control power button can be
used to turn on the video screen display
3-62