5 Utility
The card has an on-board ROM which stores the utility program " Fast! UTIL". Using
this utility program, you can set up the card, check and diagnose the device
connected.
5.1 Starting Fast! UTIL
To start Fast! UTIL, press the Alt and Q keys at the same time while the following
message is displayed on screen at the boot-up of the server.
When two or more cards are mounted in a server, the following window appears first.
Using arrow keys, select the card for which you want to use Fast! UTIL, then press the
Enter key.
6
QLogic Corporation
QLA2200 PCI Fibre Channel ROM BIOS Version 1.61
Copyright (C) QLogic Corporation 1993-2000. All rights reserved
www.qlc.com
Press <Alt+Q> for Fast!UTIL
Adapter Type
QLA2xxx
QLA2xxx
Fig. 1
Select Host Adapter
I/O Address
Fig. 2
3400
3800