Automatic Transmission (With Sportshift Mode - 2.5Gt, 2.5Gtlo) - Subaru 2003 Legacy Owner's Manual

4. Insert the screwdriver into the hole.
5. Push down on the screwdriver and move the selector lever from the
"P" to the "N" position.
6. Remove the screwdriver from the hole. Depress the brake pedal and
start the engine.
Take your vehicle to the nearest SUBARU dealer immediately to have the
system repaired.
Automatic transmission (with SPORTSHIFT mode
– 2.5GT, 2.5GTLO)
WARNING
Do not shift from the "P" or "N" position into the "D", "3", "2",
"1" or "R" position while depressing the accelerator pedal. This
may cause the vehicle to jump forward or backward.
CAUTION
D Shift into the "P" or "R" position only after the vehicle is com-
pletely stopped. Shifting while the vehicle is moving may cause
damage to the transmission.
D Do not race the engine for more than five seconds in any posi-
tion except the "N" or "P" position when the brake is set or when
HB7010CA
Starting and operating
HB7020BA
– CONTINUED –
7-21
7