Selector Lever - Subaru 2003 Legacy Owner's Manual

Hide thumbs Also See for 2003 Legacy:
Table of Contents

Advertisement

speeds and 1-reverse speed.
NOTE
Immediately after a disconnected battery is reconnected or ATF (au-
tomatic transmission fluid) is replaced, you may feel that the auto-
matic transmission operation is somewhat unusual.
This results from erasure or invalidation of data the on-board com-
puter has collected and stored in memory to allow the transmission
to shift at the most appropriate times for the current condition of
your vehicle. Optimized shifting will be restored as the vehicle con-
tinues to be driven for a while.
J Selector lever
The selector lever has seven positions.
B P (Park)
This position is for parking the vehicle and starting the engine.
In this position, the transmission is mechanically locked to prevent the
vehicle from rolling freely.
When you park the vehicle, first set the parking brake fully, then shift
into the "P" position. Do not hold the vehicle with only the transmis-
sion.
A shift interlock function is employed in the automatic transmission
system to ensure safe starting of the vehicle.
7-16
HB7010AA
HB7021BB

Advertisement

Table of Contents
loading

This manual is also suitable for:

2003 outback

Table of Contents