Other Specifications - Panduit PTS Operation Manual

DAILY TOOL INSPECTION
1. Visually inspect nose area for foreign matter and cable tie scrap. Keep this area clear of foreign matter.
2. Visually inspect applied cable ties for correct tension and cut-off to verify the working condition of the blade and gripper.
TECHNICAL SPECIFICATIONS - Air Supply
Recommended regulated air pressure supplied to tool
(pressures other than recommended may result in
unsatisfactory operation):
Air consumption at 30 cycles per minute:
Line pressure supplied to regulator:
Filter/regulator requirements:
Lubrication for air supply:
Recommended filter/regulator unit (supplied by user) with
1/8" NPT ports and 1/4" quick disconnect (industrial
interchange) plug:
Recommended main air supply hose (10 ft.), (supplied by
user) from filter/regulator to tool (supplied by user); includes
a 1/8" NPT male connector (to regulator) and a 1/8" quick
disconnect socket (to tool):

OTHER SPECIFICATIONS

Test Condition: Values determined during cycle of PANDUIT PTS @ 75 PSIG,
tension knob at STD, and tension setting at maximum.
Vibration:
Declared vibration emission value in accordance with EN 12096
Measured vibration emission value a
Uncertainty K
Values determined according to EN 28662-1:1992
Noise:
Declared Dual-Number Noise Emission Values in accordance with ISO 4871
Measured A - weighted sound power level, L
Uncertainty, K , in decibels
WA
Measured A - weighted emission sound pressure level, L
decibels
Uncertainty, K , in decibels
pA
Values determined according to noise test code ISO 15744, using the basic standard ISO 11201:1995
PTS OPERATION MANUAL
ITEM
DESCRIPTION
(ref. 1 pW), in decibels
WA
Regulator settings: 75 PSIG (5,2 bar) with a max. 10 PSI
.091 cfm @ 75 PSIG (0,043 l/sec @ 5,2 bar)
Minimum 70 PSIG (4,8 bar), Maximum 90 PSIG (6,2 bar)
5 micron maximum element rating, 5 PSI (0,3 bar) maximum
pressure drop @ 70 PSIG (4,8 bar) inlet pressure and 12
cfm (5,7 l/sec) flow minimum.
Air line lubricators are NOT to be used.
Recommended source: PANDUIT Part Number PL289N1
Recommended source: PANDUIT Part Number PPH10
(ref. 20μPa) at the workstation, in
pA
Page: 2 of 15
DESCRIPTION
(0,7 bar) drop. MAXIMUM 90 PSIG
(6,2 bar).
EU PANDUIT Part Number: MK-06
EU PANDUIT Part Number:
PPH10G
VALUE
1.20 m/s
0.40 m/s
2
2
95
2.5
85
2.5