Kenmore BC4027 Use & Care Manual page 13

DUSTING BRUSH, CREVICE TOOL,
& PET POWERMATE
1. Lift the tool storage cover to open.
2. Remove attachment as needed. See
ATTACHMENT USE TABLE (page 14).
TO REINSTALL:
Insert the attachment, press down into
place, and close the tool storage cover
securely.
TM
ATTACHMENTS ON HANDLE
NOTE: If the PowerMate
vacuum cleaner off before removing handle
from wand.
1. Press wand release
button and pull up on
handle.
2. Slide attachments
into handle as needed.
All except crevice tool
will click into place.
See ATTACHMENT USE
TABLE (page 14).
Wand
Release
Pet
TM
PowerMate
Floor
Brush
NOTE:
To remove Pet PowerMate
and/or floor brush, press the Wand
Release button and slide out.
- 13 -
is attached, turn
®
Wand
Release
Handle
Crevice
Tool
Dusting
Brush
TM , dusting brush,