Saab 2004 9-3 Owner's Manual page 108

108 Instruments and controls
Recirculation is controlled manually.
Recirculation is not selected when the engine is
started (fresh air mode).
Press or
speed. This sets the fan speed (fan speed shown on
display).
Refer also to Profiler regarding the possibility to
increase/decrease the automatic fan speed.
to increase or decrease the fan
Air distribution
When defroster is chosen, all the front windows are
demisted:
• High fan speed
• The air is directed to the defroster vents
• Normal temperature control
• Recirculation OFF
• Rear window and door mirror heating ON .
The system will remain in defroster mode until the
The following three buttons for air distribution can be selected indi-
vidually or in combination. Press the button or selection of buttons
to produce the airflow you desire. Pressing the same button twice
will return the system to AUTO. You can also select automatic air
distribution by pressing the AUTO button.
Initial air distribution to take effect on starting the engine can be set
under Profiler (see page 112).
Airflow to windshield vents.
Airflow to facia air vents.
Airflow to floor vents.
or button is pressed.