Saab 2003 9-5 2.3 Turbo Ecopower Owner's Manual page 104

104 Saab 9-5 Audio System
SCAN
Scanning the current CD:
To start the SCAN function, which enables
you to hear a sample of each track on the
disc, press and hold
ment). The display shows that SCAN is in
progress and which track is currently being
sampled. For instance, if you started SCAN
while playing track one, the following dis-
play will appear:
The sample playback starts 30 seconds
after the start of the track and lasts for 8 sec-
onds.
When all the tracks on the disc have been
scanned, the system will revert to playback
of the track that was playing when SCAN
was selected.
Press any segment of the SEEK button
during scanning to play the current track
from the beginning and simultaneously
cancel the SCAN function.
Scanning the entire magazine:
Press and hold
two chimes) to start a scan of the entire
magazine. A message similar to the follow-
ing will appear on the display:
(mid-seg-
The sample playback starts 30 seconds
after the beginning of the first track on each
CD and lasts for 8 seconds.
After the first track of each CD has been
sampled, the CD changer will revert to play-
back of the track that was playing when
SCAN was selected.
Press any segment of the SEEK button
during scanning to play the current track
from the beginning and simultaneously
cancel the SCAN function.
Random playback (RDM) (3)
Press and hold the CD/RDM button to
(mid-segment -
select/deselect random playback of the
CDs in the magazine. When this function is
selected, RDM will appear at the bottom of
the display.
Press
track to the next during random playback.
Press
track during random playback.
Pressing and holding
start Rapid play.
To stop playback from the CD changer,
simply select once to move from the current
track to the next during random playback
(RADIO/TAPE/ CD). The CD changer will
now enter stand-by mode.
once to move from the current
once to repeat the current
or will