Pontiac 2008 G5 Owner's Manual page 127

Setting Cruise Control
CAUTION:
{
If you leave your cruise control on when you
are not using cruise, you might hit a button
and go into cruise when you do not want to.
You could be startled and even lose control.
Keep the cruise control switch off until you
want to use cruise control.
J
(On/Off): Press this button to turn the cruise
control system on and off.
The cruise control buttons
are located on the
outboard side of the
steering wheel.
RES+ (Resume): Press this button to resume a set
speed and to accelerate the speed.
SET– (Set): Press this button to set a speed and to
decrease the speed.
To set a speed do the following:
J
1. Press the button to turn cruise control on.
The indicator light on the button will come on.
2. Get to the speed desired.
3. Press the SET– part of the control button and
release it. The CRUISE ENGAGED message
will appear on the Driver Information Center (DIC)
to show the system is engaged.
4. Take your foot off the accelerator pedal.
3-11