Panasonic VIERA TH-P60ST30A Operating Instructions Manual page 40

VIERA Link
• Off
• On
HDMI Content Type
• Off
• Auto
Power on Link
• Off
• On
Power off Link
• Off
• On
Standby Power
Save
• Off
• On
Intelligent Auto
Standby
• Off
• On (With reminder)
• On (No reminder)
Network Setup
DivX® VOD
Shipping Condition
System Update
Software Licence
System Information
USB Charge in
Standby
• Off
• On
Power Save
• Off
• On
Region Select
• NSW / ACT
• Victoria
• Queensland
• South Australia
• Western Australia
• Northern Territory
• Tasmania
Daylight Saving
Time
• Auto
• Off
• +1/2 hour
• +1 hour
•
A different menu will be displayed in the mode of Media Player / Network service operations. (p. 57 - 78)
•
Only available items can be selected.
40
Sets to use VIERA Link functions
•
VIERA Link functions become available when [VIERA Link] is set to
[On] (p. 80).
Adjusts the picture settings according to the content type from the
connected equipment via HDMI cable
•
This function is available if the connected equipment supports HDMI
Content Type.
•
The content type information will be displayed for several seconds
when this function works.
Sets to use Power on Link functions (p. 80)
Sets to use Power off Link functions (p. 80)
Controls the power consumption in Standby mode of the connected
equipment to reduce the power consumption (p. 80)
•
This function is available when [VIERA Link] is set to [On] and
[Power off Link] is set to [On].
Makes non-watched or non-used connected equipment go into Standby
mode to reduce the power consumption (p. 80)
•
This function is available when [VIERA Link] is set to [On].
Sets the network setting to use in your network environment (p. 71)
Displays DivX VOD registration code (p. 92)
Resets all settings to the original condition (p. 50)
Downloads new software to this TV (p. 51)
Displays the software licence information
Displays the system information of this TV
Sets to use the USB Charge functions (p. 27)
[On]: Available to charge by using any USB terminal after going into
Standby mode (Active Standby Mode)
•
Go into Standby mode after 5 hours.
Reduces brightness of the picture to economise on power consumption
Selects the region where you live to adjust the standard time (p. 21)
Selects time offset from the standard time for Summer Time (p. 21)
•
Set to [Auto] normally.