Panasonic VIERA TH-P60ST30A Operating Instructions Manual page 38

Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
• H & V
• SOG
Reset PC Settings
H-pos
V-pos
Reset DVI
Position
Settings
Eco Navigation
Recording Setup
Child Lock
38
Setup
Adjustments / Configurations (alternatives)
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
Options change depending on signals
Sets to the minimum level if noise occurs
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[SOG]: Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the DVI Position Settings to the default
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save]
[Intelligent Auto Standby]
[Auto Standby]
Formats the connected USB HDD / insert SD card and sets the condition
(p. 52 - 54)
Locks a channel / AV input to prevent access to it (p. 48)
[On]
[On (No reminder)]
[2 hours]
Adjusts horizontal position
Adjusts vertical position