Panasonic DMR-UBC80 Operating Instructions Manual page 92

Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
• On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
• Off:
Signals are output as 96 kHz.
- When the signals have a sampling
frequency of over 96 kHz.
• The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- When the disc has copy protection.
- When "BD-Video Secondary Audio" is
set to "On". ([BD-V]) (
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
HE-AAC
Select the audio signal to output.
• Select "PCM" when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
System Volume Adjustment
If the volume of a programme being watched
through this unit is different than the volume
of a programme being watched directly on the
TV, the gap may be reduced by switching this
setting to Mode 1 or Mode 2. (This function
works only while you are watching a
programme or playing back a programme
recorded in DR mode with this unit.)
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
92
TQBS0037
• To enjoy BD-Video that supports
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Language
Select the language for on-screen menus.
On-Screen Information
below)
Select the time until the channel information
screen (
Front Panel Display
Changes the brightness of the front panel
display.
• If "Automatic" is selected, the display turns dark
• When "Quick Start" is set to "Off" or "Timer
Screen Saver
This is to prevent image retention on the screen.
Teletext
Select the Teletext (
Connect this unit to an AV amplifier or similar device that
supports it with an HDMI cable, and select the following
settings:
- Dolby D / Dolby D + / Dolby TrueHD: "Bitstream"
- DTS / DTS-HD: "Bitstream"
- BD-Video Secondary Audio: "Off"
Dolby Atmos is a trademark of Dolby Laboratories.
Display
29) disappears automatically.
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
Setting for Quick Start" (
fixed to "Automatic".
29) display mode.
DTS:X
Dolby Atmos or TM
R
97), this function is