Setting The Illumination Led Light - Brother S-7780A Instruction Manual

4-6-5. Setting the illumination LED light

You can set the brightness of the illumination LED light.
1
Selecting "A08 LEd" (illumination LED light)
2
Press either.
3 Displaying the illumination LED light setting
value
Setting the illumination LED light
4
(Dark)
5
Press the key.
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
In sewing standby mode, press the
the
・ "A01 UPdn" will be displayed.
Press the -
・ When the
・ When the
・ When the
・ When the D
"1" through to "9".
・ When the C
"9" through to "1".
・ When the
NOTE:
If the
(Bright)
will switch off and the display will return to the setting item.
Setting mode will be exited and normal operation will be possible.
S-7780A
key to switch to function setting mode.
or + key to select "A08 LEd".
+
key is pressed, the next setting is displayed.
-
key is pressed, the previous setting is displayed.
key is pressed, the setting value is displayed.
key is pressed, the setting value increases from
key is pressed, the setting value decreases from
key is pressed, the initial value will be reset.
key is pressed once more, the
key while holding down
1369D
1379D
indicator
1380D
28