56
View Smart Phone
To see the Mobile Device's screen on the projector
1
Press the
button on your remote control.
2
Launch the
Screen Share
3
Enable Miracast mode on the mobile device.
4
Your projector will be displayed in the list of available devices in the menu.
5
Select your projector to start connecting.
6
A message saying Connecting... will appear to start the connection.
7
When the connection is established, the projector will display the screen of the
connected device.
•
Always update your device to be connected to your projector to the latest OS
version for a reliable connection.
•
A non-LGE device might not connect even when it is detected.
•
Connect the device to a 5 GHz router because the performance may be affected
by your wireless environment.
•
The response rate may vary, depending upon the user's environment.
•
It differs among devices. For more information on the device you want to
connect to, refer to its user guide.
•
LISTEN MODE
may affect the performance of your wireless connection when
connected to an AP. If there are any issues related to wireless performance, it is
recommended to turn off
•
If connection fails repeatedly, turn off the projector and the device you want to
connect to, then turn them back on and try again.
application.
LISTEN
MODE.