Panasonic U-8ME1E8E Service Manual page 99

9. Compressor
(7) Remove the 3 bolts, and remove the washers and rubber washers.
Remove the cushioning rubbers and
lower the compressor position to
disconnect the tubing easily.
If oil remaining in the compressor reaches the equalized oil level, oil will come pouring out when the
NOTE
tube-with-flare-nut is removed.
3
CAUTION
(8) Disconnect the discharge tubing.
(9) Disconnect the suction tubing.
Protect the sensors and the surrounding plates, rubber, lead wires, clamps, and other
items. Remove the discharge sensor.
Outdoor Unit Repair Procedures
Remove the cushioning rubber using
a crowbar.
* Place something at the contact to
protect the bottom plate from damage.
Be sure to remove the thermistor.
Cover the vibration-proof material with wet cloth.
First, insert something between the compressor and
discharge tubing to protect from damage. Then, take
up the discharge tubing using a crowbar as a lever.
First, insert something between the compressor and
suction tubing to protect from damage. Then, take up
the suction tubing using a crowbar as a lever.
3 - 34
2WAY SYSTEM