Remove A Hot-Swap Power Supply - Lenovo ThinkAgile HX1321 Series User Manual

A failed power supply unit is indicated by:
• The amber warning LED on node front panel is illuminated.
• The Lenovo XClarity Controller Web interface shows a power supply alert.
• The Lenovo XClarity Administrator Web console shows a power supply alert.
• The Lenovo XClarity Integrator console shows a power supply alert.
• The vSphere Web client Hardware Status tab shows a power supply alert
• The Nutanix Prism Web console shows a power supply alert.

Remove a hot-swap power supply

Use this information to remove a hot-swap power supply.
"Read the "ATTENTION:
installation Static Sensitive Device
Guidelines" on Ground package before opening"
page 43
on page 45
S035
CAUTION:
Never remove the cover on a power supply or any part that has this label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
S002
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the
electrical current that is supplied to the device. The device also might have more than one power
cord. To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.
S001
50
User Guide for ThinkAgile HX1321 Node ThinkAgile HX3321 Node