JVC GZ-RX625 Detailed User Manual page 100

Using Wi-Fi
Connection by Wi-Fi Protected Setup (WPS)
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
≪PLAY
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
TOP MENU
Wi-Fi
OFF
SETUP
.
3
Tap the "DIRECT CONNECTION" (N) icon in the "Wi-Fi" menu.
(Operation on this camera)
Wi-Fi
DIRECT
CONNECTION
.
When "50p" is selected for "SYSTEM SELECT", the following display
0
appears and recording mode is switched to the 50i mode.
DIRECT CONNECTION
VIDEO RECORDING AT 50i
WHEN USING Wi-Fi
.
4
Tap "WPS".
(Operation on this camera)
DIRECT CONNECTION
SET UP Wi-Fi SETTING ON
CONNECTING DEVICE
SSID:********************************
PASS:********************************
.
100
REC MENU
RECORD
SETTING
CONNECTION
SETTINGS
ACCESS POINT
CONNECTION
Wi-Fi SETTING
OK
WPS
5
Activate WPS on the smartphone within 2 minutes.
(Operation on the smartphone)
.
To activate WPS, refer to the instruction manual of the device in use.
0
6
A connection is established and Q appears on the camera's screen.
DIRECT MONITORING
.
Operation Method
1
Activate the GPS function of the smartphone.
(Operation on the smartphone)
.
For details on using the smartphone, refer to the instruction manual
0
of the device in use.
2
Start "Everio sync. 3" on the smartphone.
.
0:00:00 [2:04] 0:00:00 [2:04]
REC STOP