Brother MFC-J4340DW Online User's Manual page 50

Home > Paper Handling
Change the Paper Size and Paper Type
Set the Paper Size and Paper Type settings for the paper tray.
• To get the best print quality, set the machine for the type of paper you are using.
• When you change the size of the paper you load in the tray, you must change the Paper Size setting on the
LCD at the same time.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [General Setup]. Press OK.
b. Select [Paper Type]. Press OK.
c. Select [Plain Paper], [Inkjet Paper], [Brother BP71] or [Other Glossy]. Press OK.
d. Select [Paper Size]. Press OK.
e. Select the paper size option you want, and then press OK.
3. Press Stop/Exit.
The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine.
When you use glossy paper, remove each sheet at once to prevent smudging or paper jams.
MFC-J4440DW/MFC-J4540DW
1. (MFC-J4540DW) Press
Setting].
2. (MFC-J4440DW) Press
3. (MFC-J4540DW) Press a or b to display the tray options, and then press the option you want.
4. Press [Paper Type].
5. Press a or b to display the paper type options, and then press the option you want.
• Use plain paper only in Tray #2. (MFC-J4540DW)
6. Press [Paper Size].
7. Press a or b to display the paper size options, and then press the option you want.
8. Press .
The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine.
When you use glossy paper, remove each sheet at once to prevent smudging or paper jams.
Related Information
• Paper Settings
Related Topics:
• Load Cut-Sheet Paper or Photo Paper in the Paper Tray #1 / Paper Tray #2
• Load Envelopes in the Paper Tray #1
• Acceptable Print Media
> Load Paper > Paper Settings
[Settings] > [All Settings] > [General Setup] > [Tray
[Settings] > [All Settings] > [General Setup].
> Change the Paper Size and Paper Type
43