Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
2 Remove the assembly screws
3 Pull out the pedestal from the TV.
4 Remove the assembly screws
10
English
from the TV.
from the bracket.
Connections
External equipment and cables shown are not
supplied with this TV.
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
Check the terminal type and cable plugs are correct
for connection.
Use a fully wired HDMI compliant cable.
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
Please also read the manual of the equipment being
connected.
Terminals
8
7
1 CI slot
(p. 13)
2 Headphone jack
(p. 13)
3 USB 1 - 2 port
4 DIGITAL AUDIO
5 HDMI1 - 2
(p. 12, 13)
6 Terrestrial / cable terminal
7 AV (COMPONENT / VIDEO)
1
2
3
4
5
6
(p. 11)
(p. 12, 13)