H/W Monitor - ASROCK ROMED8-2T User Manual

3.3.8 H/W Monitor

In this section, it allows you to monitor the status of the hardware on your system, includ-
ing the parameters of the CPU temperature, motherboard temperature, CPU fan speed,
chassis fan speed, and the critical voltage.
Fan Control
If [Auto] is selected, the fan speed will controlled by BMC.
If [Manual] is selected, configure the items below.
Watch Dog Timer
This allows you to enable or disable the Watch Dog Timer. The default value is [Disabled].
FAN 1
This allows you to set the fan 1's speed. The default value is [Smart Fan].
FAN 2
This allows you to set the fan 2's speed. The default value is [Smart Fan].
FAN 3
This allows you to set the fan 3's speed. The default value is [Smart Fan].
FAN 4
This allows you to set the fan 4's speed. The default value is [Smart Fan].
56