Oldsmobile 2000 Silhouette Owner's Manual page 290

9. Now connect the black
Don't let the other end touch anything until the next
step. The other end of the negative (
go to the dead battery. It goes to a heavy, unpainted
metal part on the engine of the vehicle with the
dead battery.
-
negative ( ) cable to
the good battery's
-
negative ( ) terminal.
-
) cable doesn't
The electrical connection is just as good there, but
the chance of sparks getting back to the battery is
much less.
11. Now start the vehicle with the good battery and run
the engine for a while.
12. Try to start the vehicle with the dead battery.
If it won't start after a few tries, it probably
needs service.
13. Remove the cables in reverse order to prevent
electrical shorting. Take care that they don't touch
each other or any other metal.
10. Attach the cable at least
18 inches (45 cm) away
from the dead battery,
but not near engine
parts that move.
5-7