3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
WARNING
3-1. Disassembly and Reassembly
1.
Disconnect the LED TV from the power source before disassembly.
2.
Follow these directions carefully; never use metal instruments to pry apart the cabinet.
CAUTION
3.
If there is no additional coment, it is same for all inches.
Set Disassembly (46")
Description
1
Place TV face down on cushioned table.
2
Remove screws from the ASSY GUIDE
P-STAND.
Remove screws from the ASSY STAND
P-BASE.
•
40 inch : 4EA
•
46 inch : 4EA
•
55 inch : 4EA
•
60 inch : 4EA
Picture Description
3. Disassembly and Reassemble
Screws
Screw used contained
STAND KIT
3-1