Loading Filament - Pulse XE Getting Started Manual

STEP 14

LOADING FILAMENT

At the top right of the screen you will see the Current Extruder
Temperature status - select that menue.(A)
Under 'Filament' select 'Load'. (B)
Hang the spool of filament from the Spool Holder on the back right
side of the machine. Be sure to have the spool oriented so that the
filament flows into the extruder.
MatterControl will guide you through the loading process. Follow the
steps on the screen. (C)
For more information on Materials and Bed Surface compatibility
please visit the Guides section on www.matterhackers.com/pulse
STEP 15
START YOUR FIRST PRINT
For specific guides for succeeding with a bunch of different materials -
visit the Pulse User Guide at matterhackers.com/pulse
Locate the '3D Phil' design under the folders - Library - Calibration
Parts. Select the Design and drag it onto the bed (D)
Select 'Print' then 'Start Print.' (E)