User Interface; Main Board - Wasp Delta 3MT Industrial 4.0 Manual Of Use And Maintenance

5
Preparing to use the printer
5
P
remises

5.2. User interface

5.2.1. Main board

Fig. 5.2.1 - Main board
The main board appears when turning on the printer and when launching the print. It is intended to be the
principal tool for the monitoring and control of the printer
Legend:
1. Extruder temperature (clicking it can be modified)
2. Wifi informations
3. Operative information: position, feed, flow, state, autocalibration on/off
4. Bed temperature (by clicking it can be modified)
5. Toolbar
6. Door open/closed
© CSP S.r.l.
27