Mercedes-Benz 2005 CL-Class Operator's Manual page 57

Intermittent wiping
Set the wiper switch to position I.
i
Intermittent wiping is interrupted when
the vehicle is at a standstill and a front
door is opened.
Single wipe
Press the combination switch briefly in
direction of arrow 1.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid
Press switch in the direction of
arrow 1 past the resistance point.
The windshield wiper operates with
washer fluid.
For information on filling up the washer
reservoir, see "Windshield washer system
and headlamp cleaning system"
( page 282).
!
If anything blocks the windshield wip-
ers (leaves, snow, etc.), switch them off
immediately.
For safety reasons,
turn off the engine by turning
the SmartKey to position 0 and
withdraw SmartKey from starter
switch
or
turn off the engine by pressing
the KEYLESS-GO* start/stop
button ( page 35) and open
the driver's door (with the driv-
er's door open, starter switch is
in position 0, same as with
SmartKey removed from starter
switch)
before attempting to remove any
blockage.
Remove blockage.
Turn the windshield wipers on
again.
Getting started
Driving
If windshield wipers fail to function at
all in switch position I,
set the combination switch to the
next highest wiper speed
have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Center
55