Electrically Folding Exterior Power Windows; Opening And Closing The Power Windows - Mercedes-Benz 2005 CL-Class Operator's Manual

Cl-class
Table of Contents

Advertisement

Controls in detail
Power windows
Opening and closing the power
windows
The side windows are opened and closed
electrically. The switches for all side win-
dows are on the driver's door. A switch for
the front passenger window is on the re-
spective door.
1 Left front window
2 Right front window
3 Right rear window
4 Left rear window
5 Rear window override switch
( page 78)
198
Additional switches for the rear windows
are located on the rear center console.
6 Left rear window
7 Right rear window
Warning!
When closing the windows, make sure that
there is no danger of anyone being harmed
by the closing procedure.
The closing of the door windows can be im-
mediately halted by releasing the switch or,
if the switch was pressed past the resis-
tance point and released, by pressing the re-
spective switch.
The closing of the rear side windows can be
immediately halted by releasing the switch.
The door windows are equipped with the ex-
press-close and automatic reversal func-
tion. If the window encounters an
obstruction that blocks its path in a circum-
stance where you pressed the switch past
the resistance point and released it to close
the window, the automatic reversal function
will stop the window and open it slightly.
If the window encounters an obstruction
that blocks its path in a circumstance where
you are closing the window by pressing and
holding the switch, by pressing and holding
button ‹ on the SmartKey, or by press-
G
ing and holding the lock button (vehicles
with KEYLESS-GO*) on the door handle, the
automatic reversal function will not operate.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl 500Cl 600Cl 55 amgCl 65 amg

Table of Contents