Mazda 2008 CX-9 Owner's Manual page 321

1. Turn the ignition switch to the LOCK
position.
2. If a power supply is necessary, connect
the outlet to the power outlet.
Refer to Power outlet on page 6-88.
3. Connect the image cable and sound
cables to the input terminals.
Accessory socket
(DC12 V, 10 A)
Auxiliary
terminals
Red
White
Yellow
Sound cable (Right)
Sound cable (Left)
NOTE
For monaural equipment (with one sound
l
output terminal), connect the terminal to
either of the sound input terminals (Red)
and (White). The sound is output from the
speaker to which the terminal has been
connected.
Noise may occur depending on the
l
connected equipment.
4. Turn the ignition switch to the ACC or
ON position.
Plug
AV
equipment
Image cable
Rear Entertainment System
5. Press the SOURCE button and select
the AUX mode.
Refer to Mode on page 6-73.
6. Operate the equipment following the
instruction manual accompanying the
equipment.
Interior Comfort
6-91