Mazda 2003 MPV Owner's Manual page 32

J16L_8R21-EA-02G.book Page 23 Saturday, June 8, 2002 11:16 AM
6. Remove the support bar from the
pocket.
Support bar
7. Set the hook on the support bar in the
rear of the seatback.
Form No. 8R21-EA-02G
8. Pull the seatback towards the front of
the vehicle until the opposite end of the
support bar hooks onto the anchor loop
in the side trim. Attempt to push the
seatback towards the rear (liftgate) to
make sure the support bar is securely
latched.
Pocket
To return the third-row seat to the road
position (forward facing)
1. Detach the support bar by following
the reverse procedure for installation.
2. From inside the vehicle, carefully
lower the seat towards the front until it
locks in place. Attempt to move the
seat forward and backward to make
sure it's securely locked in place.
3. Reinsert the head restraints.
Essential Safety Equipment
Seats
2-23