Mazda 2003 Miata MX-5 Owner's Manual page 126

J07R_8R09_EA_02G.book Page 7 Monday, July 1, 2002 11:30 AM
M Heating
4
5
3
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
hot position.
4. Set the fan control dial to the desired
speed.
5. If dehumidified heating is desired, turn
on the air conditioner.
NOTE
• If the windshield fogs up easily, set
the mode selector dial to the
position.
• If cooler air is desired at face level,
set the mode selector dial at the
position and adjust the temperature
control dial to maintain maximum
comfort.
• The air to the floor is warmer than
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
Form No. 8R09-EA-02G
M Cooling (With Air Conditioner)
1
2
1. Set the mode selector dial to the
2. Set the temperature control dial to the
3. Set the fan control dial to the desired
4. Turn on the air conditioner.
5. Adjust the fan control dial and
Climate Control System
4 3
2
position.
desired position.
speed.
temperature control dial to maintain
maximum comfort.
CAUTION
When using the air conditioner while
driving up long hills or in heavy traffic,
closely monitor the temperature gauge
(page 5-19).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner
off.
Interior Comfort
1
6-7