D-Link DIR-825/AC User Manual page 142

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
User Manual
Parameter
Maximum time of
storing data on
adjacent clients
Minimum level of
connection quality
Dead zone
Multicast TTL
Multicast group
address
After specifying the needed parameters, click the APPLY button.
To disable the function of smart adjustment of Wi-Fi clients, move the Enable switch to the left.
2.4 GHz / 5 GHz
The maximum time period (in seconds) during which the access
point (router) stores data on the signal strength of the client located
on its coverage area.
The threshold value of the signal strength upon which the access
point (router) starts scanning other devices.
This parameter is used for calculation of the signal strength upon
which the smart adjustment function goes off. If the signal strength
provided by the device is less than the sum of the Minimum level
of connection quality field value and the Dead zone field
value, then the client disconnects from the access point (router) and
connects to another device. You can specify the values from -50% to
+50%.
Multicast Settings
Specify the TTL (Time to live) parameter value. The recommended
value is 4.
Specify the address of the multicast group (from the subnet
239.255.0.0/16).
Page 142 of 222
Configuring via Web-based Interface
Description