Creating Lte Wan Connection - D-Link DIR-825/AC User Manual

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
User Manual

Creating LTE WAN Connection

!
For the USB modem Megafon M100-1, please reboot the router after creating the WAN
connection.
If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating an LTE WAN connection, go to the USB modem menu and enter the PIN code
page displayed (see the USB Modem section, page 155). Then go to the Connections Setup /
WAN page and click the Add button in the Connections List section. On the opened page, go to
the All Settings tab. Then select the relevant value from the Connection Type drop-down list
and specify the needed values.
Figure 84. The page for creating a new LTE connection. Selecting a connection type.
Parameter
Enable connection
Connection name
9 For some models of LTE USB modems it is required to disable the PIN code check on the SIM card prior to
connecting the USB modem to the router.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 104 of 222
Configuring via Web-based Interface
Description
9
on the