Harbor Freight Tools Drummond 57038 Owner's Manual
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Water Pump
  5. Drummond 57038
  6. Owner's manual

Harbor Freight Tools Drummond 57038 Owner's Manual

1/8 hp multi-use utility pump
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Do not return
pump to the store.
Call 1-844-416-9141
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20f

Advertisement

Table of Contents
loading

Related Manuals for Harbor Freight Tools Drummond 57038

Summary of Contents for Harbor Freight Tools Drummond 57038

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Fluid Type

    Before start-up, note the following: The pump must be connected to a GFCI protected plug which has been installed according to regulations. The plug must have a supply voltage of 120 VAC at 60 Hz. CAUTION This pump has been evaluated for use with water only. WARNING IMPORTANT! For your own safety –...
  • Page 3 Specifications Horsepower 1/8 HP Electrical Rating 120VAC / 60Hz / 3.3A Power Cord Length 10’ Maximum Flow @ 0’ 1575 GPH Maximum Head lift @ 0’ Flow 25′ Discharge Port 1″ NPT Female Operating Water Depth Minimum 3/16″ Item 57038 For technical questions, please call 1-888-866-5797.

  • Page 4: Power Supply

    Installation The submersible motor pump must be installed in a stationary position with either: a. A fixed pipeline or b. A flexible hose. Please note! 1. Do not install the pump by suspending 2. If the water level sinks too low, any sludge in the it unsupported from its power cord.
  • Page 5 Operation TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unplug the Pump from its electrical outlet before setup or operation. 1. After reading these instructions, 2. After the Pump and discharge hose are placed, consider the following points connect the Power Cord into a 120 VAC, 60Hz before starting the Pump: GFCI protected outlet.

  • Page 6: Quarterly Maintenance

    Maintenance TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unplug the Pump from its electrical outlet before performing any inspection, maintenance, or cleaning procedure. If the Pump is moved during operation, flush it out with clean water after every use. Quarterly Maintenance The below maintenance must be performed at least once every 3 months under optimal conditions.
  • Page 7 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents