Advertisement
Quick Links
MZ3-V01
3-Step Switch
Functions
•
Electronic 3-step switch with touch panel
•
Design according to Feller EDIZIOdue
•
Manual operation with up to 3 Levels: MIN, MID, MAX
•
Automatic reset of the level MAX to MID
•
One 0...10 VDC output to output defined step levels
•
Password protected settings
•
Copy of settings with accessory (AEC-PM2)
Applications
Comfort ventilation, damper or valve positions, control of blinds.
General description
The MZ3-V01 is a microprocessor-controlled precision step switch with
touch panel. Through parameters the step switch may be configured. Settings such as switching levels for each step may
be adjusted. The step switch is configuration with a programming device called OPA-S. Configuration can as well be
updated using a remote memory device called AEC-PM2.
Ordering
Item
Item code
MZ3-V01-B3-T3
40-100240
OPA-S
40-500006
AEC-PM2
40-500130
Installation and safety advice
This device is intended to be used as 3-step switch. Where a device failure endangers human life and/or property, it is the
responsibility of the client to add additional safety devices to prevent or detect a system failure caused by such a device
failure.
The device contains electronic components and must not be disposed of with household waste.
Interface to the ventilation system
The 3-step switch works with all systems that are designed for a 0...10 VDC or 2...10 VDC input signal.
Connection diagram
Description:
1
Power supply:
2
Power supply:
3
Not used, Do not connect
4
Analog output ventilation:
Doc: 70-00-0834 V2.2, 20210419
Subject to alterations
®
Variant
Blue LED
White frame
Lettering: MIN, MID, MAX
Programming and display device
Memory-Device. Used for copying settings
24 VAC, +24 VDC
0 V, -24 VDC, internally connected to signal common
0...10 VDC
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
MZ3-V01
MAX
MID
MIN
Features
Compact positioner/controller
in a Feller EDIZIOdue®
frame, with one 0-10 VDC
output. Operation as 3-step
switch with touch panel.
LCD display for surface
mounting or handheld
operation.
Stores settings of MZ3
Page 1
Advertisement
Related Manuals for Vector MZ3-V01
Summary of Contents for Vector MZ3-V01
- Page 1 Comfort ventilation, damper or valve positions, control of blinds. General description The MZ3-V01 is a microprocessor-controlled precision step switch with touch panel. Through parameters the step switch may be configured. Settings such as switching levels for each step may be adjusted. The step switch is configuration with a programming device called OPA-S. Configuration can as well be updated using a remote memory device called AEC-PM2.
- Page 2 140 g (5.0 oz) Weight (incl. packaging) Dimensions mm (in) The MZ3-V01 is so designed that it can be incorporated into a commercially available flush box (Feller EDIZIOdue frame ® and mounting plate are included). Selecting the signal from 0-10 VDC to 2-10 VDC with JP1 If JP1 is in position 1-2, the output signal is 0…10 VDC...
- Page 3 Software configuration The MZ3-V01 is designed to work for most comfort ventilation applications. It is however possible to fine tune it to fit perfect into the application at hand. The parameters can be changed during operation through an operation unit called OPA-S.